|
|
PHOTO ETCH
|
|
|
|
|
|
NOTE: All patinas, by their very nature, will vary from plaque to plaque and order to order and will change over time. Patina finishes may "bleed" onto the installation surface when installed outside. Patina finish is available on smooth texture only.
DARK OXIDIZED |
LIGHT OXIDIZED |
VERDE PATINA |
PARROT GREEN PATINA |
TURQUOISE PATINA |
EMBLEMS & LOGOS MILITARY SEALS
|
||||
Threaded rods screwed into back of plaque and placed into cement filled holes. |
Machine screws going through optional rosettes into cement filled holes. |
Installation using toggle bolts with optional rosettes for hollow or drywall mount. |
Installation into wood surfaces using wood screws and optional rosettes. |
Machine screws going through 3/8" thick black anodized stakes into back of plaque. Maximum plaque size is 12" x 8" for 1 stake or 20" x 8" for 2 stakes. |
Black enamel-coated steel square posts attach to the back of the plaque with machine screws. Post can be welded with an angle you specify. |
1/2", 3/4", 1" & 1-1/2" |
1/2", 3/4", 1" & 1-1/2" |
1" & 1-1/2" |
1" & 1-1/2" |
1/2", 3/4" & 1" |
1" & 1-1/2" |
1" & 1-1/2" |
NOTE: All patinas, by their very nature, will vary from plaque to plaque and order to order and will change over time. Patina finishes may "bleed" onto the installation surface when installed outside. Patina finish is available on smooth texture only.
DARK OXIDIZED |
LIGHT OXIDIZED |
VERDE PATINA |
PARROT GREEN PATINA |
TURQUOISE PATINA |
BLACK |
BROWN |
DARK OXIDE |
SATIN FINISH | POLISHED FINISH |
PRIME BRONZE (220 Commercial) is used for bronze plaques. This alloy is lead and mercury free. Plaque faces are stroke-sanded with baked enamel backrounds before being clear-coated and oven-baked with a two part hardened acrylic polyurethane. |
SATIN FINISH | POLISHED FINISH |
PRIME BRASS (C46400) is used for brass plaques. Plaque faces are stroke-sanded with baked enamel backgrounds before being clear-coated and oven-baked with a two part hardened acrylic polyurethane. |
SATIN FINISH | POLISHED FINISH |
PRIME ALUMINUM (#5052) is used for aluminum plaques. Plaque faces are stroke-sanded with baked enamel backgrounds before being clear-coated and oven-baked with a two part hardened acrylic polyurethane. |