![]() STRAIGHT EDGE |
BEVEL EDGE (optional) An optional bevel (41�) edge is applied to one half the material thickness. Bevel edges are not available on 1/16" thick material or any Stainless Steel. |
![]() BEVEL EDGE |
STRAIGHT EDGE (standard) The standard edge on an etched plaque is a straight edge (90�) |
![]() |
STAINLESS STEEL Alloy 304; Optional Alloy 319. Thicknesses include 1/16", 1/8", 3/16" & 1/4". |
STAINLESS STEEL
![]() |
COMMERCIAL BRONZE (90/10) Alloy C22000; 90% Copper, 10% Zinc. Thicknesses include 1/16", 1/8", 3/16" & 1/4". |
COMMERCIAL BRONZE
![]() |
NAVAL BRASS (60/39/1) Alloy C46500; 60% Copper, 39.25% Zinc, .75% Tin. Thicknesses include 1/16", 1/8", 3/16" & 1/4". |
NAVAL BRASS
![]() |
COPPER Alloy C11000; Thicknesses include 1/16", 1/8", 3/16" & 1/4". |
RECESSED GRAPHICS![]() |
RAISED GRAPHICS (optional) When raised text or graphics is specified, the background will be painted, leaving the text or graphics in the alloy color. |
RAISED GRAPHICS ![]() |
RECESSED GRAPHICS (standard) The standard on all Etched Plaques is recessed text and graphics that are paint filled. |
STUD MOUNT![]() STUD MOUNT (blind mount) All plaques 1/4" thick and thicker are drilled and tapped. 1/16" & 1/8" thick plaques have double face tape applied to the back. Tape is 3M #4930 - 25 mil. Tape for use in most applications. You will need to verify if this works for your applicatio |
STUD BOSS MOUNT
STUD BOSS MOUNT Stud bosses can be welded to the backs of 1/8" & 3/16" thick plaques. |
![]() |
SCREW MOUNT (flush mount) Holes are drilled through the surface of the plaque. Specify screw size and if you need the holes to be countersunk. 1/16" thick plaques cannot be countersunk and will include round head screws. |